Option 3: Use DiskMaker X. DiskMaker X (previously called Lion DiskMaker) is a utility that makes it easy to create a bootable OS X install drive, and version 3 supports the Mavericks installer. Install Mac OS X Mavericks on PC with Hackintosh Mavericks Installer, to Install this you dont need access to a Mac This release can be used with AMD processors too. For detail Installation Guide and Instruction read: Install Hackintosh Mavericks on PC/Laptop Features: You dont need a real Mac Th. Mac OS X Mavericks 10.9.5 is a powerful operating system with a variety of enhancements and a variety of new features that delivers more stability and ultimate level of performance. Download file - Install Mac OS X 10.9.0 Mavericks.dmg. Niresh Mac OS X Mojave Hackintosh DMG supports UEFI compatible computer only and Clover UEFI is used as the.
Mavericks is the latest Mac operating system released by Apple. There are a few reasons why you may desire to install Mavericks from a USB Flash drive. Having it on a USB drive can come in really handy if you have to install Mavericks on multiple Mac’s as it means you don’t have to re-download it onto each of your computers.
Also, it’s really handy if your Mac crashes and the only way to get it working again is to reformat and re-install OS X Mavericks. Harry potter and the cursed child full movie online, free. Also, installing from a USB Flash drive is a lot faster than downloading a new copy from the App Store, it’s even faster than installing from a DVD.
The instructions for setting up a USB Flash drive with OS X Mavericks has slightly changed from the instructions of installing OS X Mountain Lion from USB, but don’t worry about that. I’ll walk your through the whole process.
This is not the only method of creating a bootable Mavericks USB, if you are looking for simpler method check out:
#1 – Download OS X Mavericks
:max_bytes(150000):strip_icc()/MavericksPackageContent-585af3ef3df78ce2c30d4e13.jpg "Os X Mavericks Installer Dmg")
First thing you need to do if you haven’t already is download OS X Mavericks. This is a FREE download from Apple. Here’s link to it: OS X Mavericks
#2 – Prepare your USB Flash Drive
First off, you will need a formatted 8 GB Flash drive.
Before we can restore Mavericks onto the USB Flash drive, the drive has to be properly formatted.
To format the USB drive open Disk Utility (located in Applications/Utilities). Now plug the drive in into your Mac.
- Select the USB Flash drive from the sidebar in Disk Utility.
- Select the “Erase” tab.
- Make sure the Format is set to Mac OS Extended (Journaled)
- Finally click the Erase tab.
One important note about Step 4, this will erase everything that is currently on your USB drive.
#3 – Show the Hidden BaseSystem.dmg File
Next, we are going to look for a file called BaseSystem.dmg. Unfortunately, it’s a hidden file. To show the hidden files open Terminal (located in Applications/Utilities). Copy and paste the below into Terminal:
Paste this code and press the enter key to show the hidden files & folders:
defaults write com.apple.finder AppleShowAllFiles YES
Finder has to be restarted. Paste this code and press enter:
killall Finder
More methods that don’t require using Terminal: How to Show Hidden Files & Folders on Your Mac
#4 – Restore BaseSystem.dmg to USB Drive
Now we need to navigate to the BaseSystem.dmg file that we will be restoring on to the USB drive.
- Go to the Applications folder.
- Right-click “Install OS X Mavericks”.
- Select “Show Package Contents”.
- Navigate through Contents -> SharedSupport
- Double-click (open) InstallESD.dmg
- In the mounted folder that opens we can now see the BaseSystem.dmg files that would normally be hidden.
- Open Disk Utility (located in Applications/Utilities).
- Select the USB drive partition that you want to put the Mavericks installation setup on.
IMPORTANT: Select the automatically created partition of the USB drive not the drive itself (shown in the sidebar). If you select the USB drive instead of the partition you will get this error: Restore Failure – Could not restore – Resource busy
- Select the Restore tab.
- Drag the BaseSystem.dmg file into the “Source” field.
- Drag the USB partition into the destination.
- Click the Restore button.
#5 – Delete Packages shortcut and paste Packages folder
There is one finally step we need to complete in order to turn the USB into a fully useable method of installing Mavericks.
- Open the USB drive.
- Navigate to System -> Installation
- Now there is a shortcut file called Packages.
- Delete Packages Shortcut file.
- We need to remove this file because it’s simply a shortcut file to the folder that actually stores the files we need. We are going to replace this file with the actual folder that it links to.
- Open the mounted OS X Install ESD folder (the same folder the BaseSystem.dmg file was located).
- Copy the “Packages” folder to the folder we just deleted the Packages shortcut file from.
Congratulations you just created a working Mavericks install USB drive! Assassins creed black flag female mod.
Now there are two ways of booting into the USB.
Choose one method:
1. Open System Preferences -> Startup Disk -> Select the USB drive -> Click the “Restart” button.
OR
2. While your Mac is restarting hold down the “alt” key on the keyboard and select the USB drive.
Hey guys, Here is a guide on 'How to install OS X 10.9 on a PC with a Gigabyte 990FXA Series Motherboard and AMD FX Series CPU'.
It will also show you how to dual boot windows and OS X and even run the same windows install inside of OS X with VMWare Fusion.
Before we start, Here is the exact specification i am using for my Hackintosh install.
- Motherboard: Gigabyte 990FXA-UD3
- CPU: AMD FX-6100
- Memory: Corsair Vengeance 8GB 1600Mhz (2x4gb)
- Graphics Card: Sapphire AMD Radeon HD 7850 2GB OC Edition (1002 6819)
- Operating Systems: Windows 8 and OS X 10.9.1
Ok so although this guide is intended for install on the above hardware it may or may not work on other hardware, It will most likely work on the UD3, UD5 and UD7 motherboards aswell as most modern Radeon HD Graphics.
Requirements
The following items will be required in order for this to work.
Cached
- Windows 7, 8 or 8.1 (DVD or USB)
- Niresh 10.9 (Torrent: http://www.niresh12495.com [it's the most downloaded file currently])
- A USB Pen (Niresh - 10.9 - Mavericks USB Version.zip) or Dual Layer DVD+R (Niresh - 10.9 - Mavericks ISO Version.zip)
- Access to both Windows and the Niresh Mavericks USB at the same time.
- You need to take your time and be patient. Both windows and OS X take some time to install.
- 1 HDD that is able to be completely formatted (wipe partition table)
Note: you don't need Windows if you don't want to dual boot
Preparation
I am not going to cover how to write the DMG file to a USB pen or DVD and instead will just link you to http://www.macbreaker.com/2014/01/instal..iresh.html (Step 1a if your currently in OS X and 1b if your in Windows)
So once you have the Bootable USB/DVD with Niresh on it we are ready to begin.
We need to format the HDD with the partition type MBR (for some reason when i did this with windows it didn't work) to do this will shall boot to the Niresh USB/DVD and at the prompt highlight 'Niresh Mavericks' and simply type 'amdfx GraphicsEnabler=No PCIRootUID=1 -v' and press 'Enter'.
Mac Os 10.9 Dmg
If you don't plan on dual booting you can skip to 'Installing OS X 10.9'.
After a short time it should start booting to the OS X installer, Select your language and then in the menu bar Select Utilities > Disk Utilities > Select the HDD you want to use > Partition > 2 Partitions and then set the 1st as MS-DOS (FAT) name it 'Windows' and the 2nd as 'Mac OS Extended (Journaled)' name it 'Mavericks' now select 'Options' and make sure it's set to 'MBR (Master Boot Record)' then press 'Apply'
OK now the HDD is properly partitioned, We now move on to installing Windows.
Installing Windows 7, 8 or 8.1
This is installed just like normal, Except you need to make sure it doesn't install the UEFI version (make sure to select the non UEFI DVD/USB entry from the boot menu)
Once your at the install simply do a 'Custom Install' and then install windows to the 1st Partition it will need to be formated to NTFS via the format button below prior to being installed.
After the install is complete go through the standard welcome screen and post install setup and then we can move on to installing Niresh's OS X 10.9
Installing Niresh OS X 10.9
And now we are on to the main event, Installing OS X.
Boot to the Niresh USB/DVD and then at the prompt highlight 'Niresh Mavericks' and simply type 'amdfx GraphicsEnabler=No PCIRootUID=1 -v' and press 'Enter'
Now you should be back at the OS X install screen, This time we will actually install it, Follow the on screen wizard until you get to the HDD Select page then select the 'Mavericks' disk but DO NOT PRESS NEXT/INSTALL instead press 'Customize' and uncheck the option 'GraphicsEnabler' located under the 'Graphics' section.
Mac Os X Download
Now you can begin the install. Press the install button and prepare to wait a while depending on your SSD/HDD.
Fixing A Few Issues With OS X
Ok now we have OS X and Windows installed but most likely booting OS X from the HDD won't work and instead you will need to use the USB/DVD.
See Full List On Sundryfiles.com
So once again boot to the Niresh USB/DVD but then at the prompt highlight 'Mavericks' instead of 'Niresh Mavericks' enter ' 'Kernel Cache'=amd GraphicsEnabler=No PCIRootUID=1 -v ' note the quotes need to be entered around the words 'Kernel Cache'.
After a little while it should boot to OS X and ask you to enter various information for the welcome screen, After you have entered this you should be at either the 'Login Screen' or the 'Desktop'.
If your using the exact same card as mine you most likely are not running at native resolution and are instead forced to 1024x768, To fix this we need to modify 2 kext files, if your running at native resolution skip the step below.
Load up a Terminal (Search > Terminal) and then type 'sudo su' and enter admin password, Now type 'nano /System/Library/Extensions/AMD7000Controller.kext/Contents/Info.plist' and then find '68181002' and change it to your device and vendor ID (mine is 68191002) once done press 'Ctrl or Win + X' and then repeat the same change for '/System/Library/Extensions/AMDRadeonX4000.kext/Contents/Info.plist'.
Now the graphics is sorted provided your using a similar card to mine atleast, Now we can sort out issues with the bootloader on the HDD, Download 'Chameleon Wizard' then run it and select 'Boot0HFS' as the install mode and then press 'Install'.
Now reboot and you should be able to boot from the HDD and select the 'Mavericks' option, you may need to enter 'GraphicsEnabler=No' and '-v' is useful to see more detailed/verbose information.
Congratulations you are done sorting out OS X, The steps below are optional but highly recommended.
Updating the AMD Kernel and OS X
So you successfully got OS X working on your system, Now we should update OS X to the latest version (10.9.1 as of the time i was writing this) and the AMD Kernel to a newer and faster version.
Download the following file http://www.osx86.net/files/download/3736..4-support/ and extract it.
Mac Os Mavericks Download Iso
Next select 'Go' on the menu bar, and then 'Go to folder' and then '/', This will put you to the root of the OS X Partition, Now we need to replace the mach_kernel with the download mach_kernel file. Simply copy and paste and confirm the authentication.
Now we need to copy the downloaded 'System.kext' to '/System/Library/Extensions/', once this is done you will most likely get some errors don't panic!.
Now we load 'Kext Wizard' (installed with niresh) and select 'Repair' and 'Rebuild' under the '/System/Library/Extensions/'.
Once 'Kext Wizard' is done, Click the 'Apple icon' in the 'Menu Bar' and select 'Software Update' and 'Update All', This will take a little while, When asked to reboot say yes.
Nick games super brawl world 2. Now your system should reboot and you should be back at OS X at 10.9.1 instead of 10.9.0.
Running Windows 8 Inside OS X Using VMWare Fusion
Ok so, So far we have Windows and OS X installed to the same HDD on your PC, Now we will use the physical install of Windows inside of VMWare Fusion this will allow us to use Windows both inside of OS X and as a actual boot option.
Of Course this requires VMWare Fusion and this is a commercial piece of software therefore you will need to acquire VMWare Fusion prior to continuing.
Ok so now that you have acquired VMWare Fusion and installed it we can continue on to setting up the 'boot camp' partition.
Firstly we need to make sure that the windows partition is set to be the active partition, to do this we can load 'Terminal' > 'sudo su' > 'fdisk -e /dev/rdisk0' > 'f 1' > 'write' > 'y' > 'exit'.
Ok now it should have set the windows partition as the active partition, Now load up 'VMWare Fusion' and select 'More Options' and then 'Install from bootcamp' and then 'Create bootcamp virtual machine'.
Now the VM should be created and you should be able to simply start the VM and Windows 7, 8 or 8.1 should start and start the vmware tools install procedure. Now exit the VM and VMWare.
Now we need to restore the active partition back to OS X by doing the following load 'Terminal' > 'sudo su' > 'fdisk -e /dev/rdisk0' > 'f 2' > 'write' > 'y' > 'exit'.
And now we are done! click the 'unity' button in VMWare to integrate it even more. We now have VMWare with Windows + Windows as Dual Boot with OS X.
Extras
R9 270 and R9 270x users can use this file to get graphics working correctly (http://www.osx86.net/files/file/3711-amd..70-series/) DON'T UNCHECK GRAPHICSENABLER DURING INSTALL OF OS X
Thanks to Niresh and everyone else involved!